Phil Jones Bass PE-5 5 Band EQ/Direct Box/Signal Boost - Used

Description

ProAudioStar
DJ GEAR
INSTRUMENT GEAR
LIVE SOUND
RECORDING
MICROPHONES
HEADPHONES
ACCESSORIES
SOFTWARE
LIGHTING
BUNDLES
Authorized Dealer
Phil Jones Bass PE-5 5 Band EQ/Direct Box/Signal Boost - Used
5 Band EQ/Direct Box/Signal Boost
- Open Box -
Description
The PE-5 is a pedal designed for bass guitar and upright bass which incorporates a sophisticated 5 band EQ and also offers superior function as a Pre-Amp, Direct Box, and signal booster.
The PE-5 is engineered with a unique switchable input impedance which allows the pedal to match exactly to either a magnetic or piezo pickup. It achieves the full band spectrum for either pickup source. In addition it is a signal booster which compensates for low output pickups and will also provide ample drive for any amplifier. The input level and gain controls are designed to precisely match the pickup output to an amplifier.The line output is strong enough to use directly into a power amplifier or a powered speaker.
The 5-band EQ is a high precision equalizer which means that each boost or cut level is identical to each adjacent band. Plus the Q factor of each band is identical. This makes it far easier for the player to accomplish the tone that they are pursuing. These frequency bands were carefully chosen for the voice of a bass so that the user will be able to adjust the EQ rapidly to get the desired sound.
The DI output is of the highest audio quality obtainable providing a match to even the finest recording studio mixing consoles and live sound systems. It has extremely high signal to noise ratio and features a ground lift switch to eliminate the possibility of “Mains Hum”.
The PE5 can be powered by a standard 9-volt DC pedal adaptor or run on its own internal lithium-ion battery that is charged with a standard cell phone charger via its USB socket.
The two foot switches provide a mute function and a true bypass. The rugged housing is constructed of die cast aluminum alloy made to deliver years of service.
1/4” INPUT JACK : The input jack accepts an unbalanced signal from your bass via a standard 1/4” instrument cable.
Input Impedance
DC IN : External power supply connection 9VDC / 1A
USB TYPE-C-For Inner Li-Battery Charge
Low-Bass Eq Control : This will adjust the fundamental tones of E and A strings on 4 string basses and B,E & A on 5 string basses.
High Bass EQ Control : This will adjust the fundamental tones of D and G-strings on 4 & 5 string basses.
Overload Indicator
1/4” Output Jack : This output can be connected to power amp, powered cabinet and unbalanced input of other devices via a standard 1/4” instrument cable.
Balanced Line Out Xlr Socket : This is a low impedance (200Ω) balanced line out for use with recording or PA mixing consoles. This output is not controlled by the volume control.
Changing the level on your instrument will however, vary the DI output.
Ground /Lift Balanced Line Out : This allows the grounding of balanced out socket to be disconnected. This is useful if you are experiencing hum caused by grounding loops/problems.
Pre/Post Eq Balanced Line Out : The output can be either direct from the source or via the EQ circuit.
Mute Switch : To cut the sound off from the instrument.
Mute Indicator : To show that you have muted the instrument.
Output Level Control : Can adjust the volume or match the outpu t to an amplifier/mixer.
Input Gain Control : Allows the matching to weak or strong pickups.
On Switch : turns the preamp on and off and bypasses the signal direct; the LED indicator is green when the EQ is on. The LED indicator is red when the EQ is bypassed.
Effect On/Power On Indicator : Shows when the EQ is ON.
Power Switch : Switches the EQ on or OFF. In off mode the EQ is bypassed.
Features/Specs
Input
Impedance PieZo=4.7MΩ, MaGnetic =2M Ω,
Maximum input before clipping – 4 Volts (peak to peak
Gain Range
From -6 dB to +6 dB
EQ
LO -Bass : Level ±12 dB (Freq. 50Hz)
HI-Bass : Level ±15 dB (Freq. 160 Hz)
MID : Level ±15 dB (Freq. 630KHz)
LO-Treble : Level ±15 dB (Freq. 2.5 KHz)
HI-Treble : Level ±15 dB (Freq. 12 KHz)
Input
Input-B(1/4”Phone)
Outputs
Unbalanced 1/4” Jack
Balanced Di Out with transformer (GND switch)
Controls
Gain / Level
Switches
Bypass | MUTE | ON/OFF | PRE/POST
Power Requirement
9VDC : 1A from separate 9volt 1 amp (minimum) adaptor
Dimension (W x D x H)
120 x 95 x 37 mm
We are authorized dealers for all these brands. Click a logo to see our listings.
ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
We provide free shipping to the contiguous 48 United States, on most items.
Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
Please contact us for a Return Authorization before returning any items.